当前位置: 首页  >> 产品中心  >> 管座  >> 镶入式支管嘴 | Sweepolet

镶入式支管嘴 | Sweepolet


Sweepolet Specification:

Size/尺寸 1/2" NPS TO 24" NPS
Class/压力等级 3000LB, 6000LB, 9000LB (STD, SCH80/XS, SCH160, XXH)
Type/连接形式 Buttweld/对焊
Surface Treatment/表面处理 Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Soldering
Materal/材质 Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Manufacturing process/制造工艺 Cutting, Heat treatment, Forging, Machining
锯切、热处理、模锻、机加工
Manufacturing Standards/制造标准 ASME B31.3


Sweepolet Material Grades:

Stainless Steel/不锈钢 ASTM A 182F304, F304L, F304H, F316, F316L, F316Ti, F310, F310S, F321, F321H, F317, F347, F347H, F904L
Duplex & Super Duplex Steel/双相钢 ASTM A 182 – F51, F53, F55, S31803, S32205, S32550, S31254, SMO254, S32750, S32760, S32950.
Carbon Steel/碳钢 ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2
Alloy Steel/合金钢 ASTM / ASME A 182, ASTM / ASME F5, F9, F11,F22, F 91
Copper Alloy Steel/铜合金 Copper Alloy Steel Forged Threaded 90 Deg Elbow : ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Nickel Alloy/镍合金 ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)


Sweepolet Dimesions:

   
 
Sweepolet Dimesions Table :
Run Size Outlet Size Dimensions
Inches *A B
6 to 36 1 1/4 1 1/4 4
6 to 36 1 1/2 1 3/4 5 1/2
6 to 36 2 1 1/2 5 1/2
6 to 36 3 1 21/32 7
6 to 36 4 2  1/32 8 3/4
10 to 36 6 2 11/16 13
12 to 36 8 3 15
16 to 36 10 3 1/8 18 1/2
16 to 36 12 3  5/16 20 1/2
20 to 36 14 3 5/8 24
24 to 36 16 3 3/4 28
24 to 36 18 4 5/8 31
24 to 36 20 5 1/8 33
30 to 36 24 5 5/8 38
A sweep outlet is a type of  integrally reinforced branch connection used to facilitate radiography, one or many non-destructive tests (NDT) used to inspect welds.
This type of NDT uses Gamma or X-rays to penetrate material. The rays are then passed through film on the opposite side .the exposed film is examined as a negative and displays the internal features The thickness of the weld is shown through lighter or darker areas on the film.
快捷导航
首页
关于我们
产品中心
管件牌号
质量控制
下载中心
应用领域
管道资讯
联系我们
产品中心
对焊管件
螺纹管件
插焊管件
管座
钢制法兰
双相不锈钢管件